● Sliding layer material: TEFPLAS® B

● Operation temperature ±200℃

● Max. continuous running speed 1.5m/s

● Inner height：12 mm

● Inner width：10-12 mm
● Bend radius：18-38 mm
● Link pitch：20 mm

● Inner height：12 mm

● Inner width：10-12 mm
● Bend radius：18-38 mm
● Link pitch：20 mm

● GE bearings have a composite outer ring with inner wear-resistant layer and hard chrome-plated steel balls inside
● Excellent sliding properties in seawater
● Working temperature -40/+130℃

DURAFILM® polymer coatings combine thermoplastic and thermosetting composite layers, providing superior lubrication performance for components operating in extreme environments...

● Standard sliding pads made from EPB13， available high temperature material EPB21

● HTD standard tooth type for the outer ring

● For very high load applications

Hard anodized surface aluminum tube; High anti-wear EPB7 bushings or FDA grade and high anti-wear EPB23 bushings; High precision and long life; Low driving force; More length upon request;

● Standard sliding pads made from high temperature material EPB21

● Easy to install with replaceable sliding pads

● Inner and outer rings made of anodized aluminum

● Continuous working temperature: -20/+120℃；
● Low coefficients of friction；
● Available underwater；
● Easy to cut；

● K type ball material EPB15
● Stainless steel balls for higher tightening torque
● Housing material: M163
● Simple assembly with the locking nut

●Sliding layer with FDA grade material TEFPLAS^® P

●High precision requirement

●Self-lubricating, maintenance-free

●Smooth operation, low noise

● Closed block design and increased the guide length
● Assembled 2pcs liners LIN-12
● Anodized aluminum pillow blocks
● Mounted from one side or top with bolts

●Sliding layer material: TEFPLAS^® B

●Self-lubricating, maintenance-free

●Smooth operation, low noise

●Split design, low cost

The rotation parts of PEC05 rotary chains are with self-lubricated plastic plain bearings, The plastic bearings made of EPB15 maintenance free materials, The chains with easy to link or open design...

● For dry applications
● High load capability
● Low friction coefficient
● Continuous working temperature: -60/+120℃

Small pitch for low-noise, smooth running, Two-pieces design, openable along the inner or outer radius

Inner height: 10 to 20mm
Inner width: 10 to 50mm

● High dual guide rails made of aluminum, Hard anodized surface

● Hard anodized surface

● Weight saving and no noise

Anti-wear plastic ball with high speed sliding bushing ALG;Housing made of high strength material M163;High speed up to 1m/s;Maintenance-free dry operation;High dime;sional stability;Compensation of misalignment errors;Very light, easy installation

The installation holes are consistent with the standard ball guide rails；Available longer design by the guide rails connection；Smooth moving, Driving force is about 10% of sliding carriages...

Special crossbar design for multiple inner width, High strength and stable, openable along the both sides

Inner height: 32 to 80mm
Inner width: 200 to 600mm

● Linear bearing with square flange
● High-performance polymer EPB13
● Easy assembly by hand
● Resistance to dirt and dust

The dimensions are the same as the ball bearing guides；Made of hard anodized surface of aluminum alloy；Lightweight design; Resistant dust; Quiet operation...

● Dry operation and maintenance-free
● Compensation of misalignment errors
● Absolute corrosion resistance
● Smooth running and no noise

● Spherical ball made of highly wear-resistant EPB15
● Housing made of high strength and shape-stable M163
● Connection rod made of high strength aluminum alloy
● The center distance up on request

● Rolling and sliding hybrid blocks 

● Smooth moving and driving force reduced 45%

● Carrying capacity is twice that of the standard type

● Rolling and sliding hybrid carriages

● Smooth moving and driving force reduced 45% than the standard carriages

● Sliding liners material: EPB13

● For side installation of WR02 guide rails

● Continuous working temperature: -40/+200℃

● Very low coefficient of friction

● Maintenance-free dry operation

● High temperature and good chemical resistance

● Continuous working temperature: -40/+110℃

● Maintenance-free, self-lubricated

● Impact resistance, low noise

● Excellent dimensional stability

● TPE outer jacket
● Shielded
● UV-resistance
● Oil-resistant
● Temperature： -55/+90℃