EPB10 Self-lubricating plastic rods

Product Features

● Continuous working temperature: -100/+250℃

● Maintenance-free, self-lubricated

● Good wear resistance with long service life 

● Good chemical resistance


Material properties 

Standard

Unit

CSB-EPB10

General properties

Color

-

-

Black

Density 

ISO1183

g/cm3

1.42

Max. moisture absorption, 50%RH

ISO62

%

0.1

Max. water absorption

ISO62

%

0.5

Coefficient of sliding friction(steel)

ITS025

µ

0.10-0.25

Max. PV value

ITS026

N/mm2×m/s

1.35

Mechanical properties

Flexural modulus

ISO178

MPa

10000

Flexural strength

ISO178

MPa

210

Max. static load

ITS027

MPa

125

Max. dynamic load

ITS028

MPa

80

Shore hardness

ISO868

D

86

Physical and thermal properties

Long-term application temperature

ITS029

+250

Short-term application temperature 

ITS029

+315

Lowest application temperature

ITS029

-100

Thermal conductivity

ISO22007

W/m/K

0.60

Coefficient of thermal expansion 

ISO11359

K-1×10-5

5

Flammability

UL94

Class

V0

Electrical properties 

Volume resistance

IEC60093

Ω·cm

>105

Surface resistance 

IEC60093

Ω

>105

*ITS:CSB company's internal test standards.  

**Test temperatures are 23℃ unless otherwise stated.

EPB10 Self-lubricating plastic rods
Part no.:
Diameter [mm]:
Length [mm]:
*Lead time [wks]:
Dimensions
MediumEPB10 bearings resistance
AlcoholResistant
HydrocarbonsResistant
Greases. oilsResistant
FuelsResistant
Diluted acidsResistant
Strong acidsConditionally resistant
Diluted alkalisResistant
Strong alkalisResistant
CSB® Bearing Material Chemical Resistance
Please select bearing material and medium...
R - Resistant
CR - Conditionally resistant
NR - Not resistant
ND - No test data
RD - Resistant,but the dimension changed due to moisture absorption
NO - No data
CSB® bearing material chemical resistance data is a comparison test result of the CSB chemistry laboratory using laboratory specimens or similar chemicals at room temperature 23 ℃, without considering the impact of other temperatures and chemical medium mixtures on the chemical resistance of CSB® bearing materials ; Therefore, this data can only act as a reference. CSB® recommends that the chemical resistance of actual parts should be tested under application conditions and verify the suitability of the bearings.
DURAPLAS® Semi-finished Products Finder V2.0
CSB-SFP®
Semi-finished Products Finder V2.0
view tools
DURAPLAS® Semi-finished Products Finder V2.0

DURAPLAS® Semi-finished Products Finder[V2.0] is based on the analysis and calculation of a large number of test data in CSB® laboratory. You can calculations material data by entering parameters such as bearing load, speed, and temperature, and finally output material adaptation data.
Because the system calculate and analyze based on lab data, it can't exactly meet the ractual use requirements absolutly. The system data verification has certain limitations; CSB® recommends that the products must be tested again to verify whether it meets the actual use requirements.
DURAPLAS® Semi-finished Products Finder output data information is only for design reference, and can not be used as the final standard for determining the bearing material conformity, If you have any questions, please contact CSB® sales engineers.

CSB® More products
MN71 Self-lubricating plastic plates

● Continuous working temperature: -40/+110℃

● Maintenance-free, self-lubricated

● Suitable for operation in dusty environment 

● Suitable for working in humid environment

MN71 Self-lubricating plastic rods

● Continuous working temperature: -40/+110℃

● Maintenance-free, self-lubricated

● Suitable for operation in dusty environment 

● Suitable for working in humid environment

EPB5A Self-lubricating plastic rods

● Continuous working temperature: -100/+250℃

● Suitable for high load and lovo speed operation 

● High load capacity at higher temperature 

● Good chemical resistance

M80 Self-lubricating plastic rods

● Continuous working temperature: -40/+90℃

● Maintenance-free, self-lubricated

● Suitable for most application

● Suitable for medium and high load operation 

Navigation

Asia
Name:Anna
Tel.:+86-573-84187672
E-mail:sales02@csb-ep.com

Europe
Name:Belle
Tel.:+86-573-84187009
E-mail:sales01@csb-ep.com

Oceania
Name:Anna
Tel.:+86-573-84187672
E-mail:sales02@csb-ep.com

South America
Name:Belle
Tel.:+86-573-84187009
E-mail:sales01@csb-ep.com

North America
Name:Belle
Tel.:+86-573-84187009
E-mail:sales01@csb-ep.com

Middle East
Name:Anna
Tel.:+86-573-84187672
E-mail:sales02@csb-ep.com

Africa
Name:Anna
Tel.:+86-573-84187672
E-mail:sales02@csb-ep.com

CSB in Germany

E-mail:info@csb-gleitlager.de

CSB in France

E-mail:p.mouclier@csb-bearings.fr

CSB PLASTIC in Russia

E-mail:Russia@csb-ep.com

CSB PLASTIC in America

E-mail:America@csb-ep.com

CSB PLASTIC in Australia

E-mail:Australia@csb-ep.com

CSB PLASTIC in Finland

E-mail:Finland@csb-ep.com

CSB PLASTIC in Italy

E-mail:Italy@csb-ep.com