Polymer-tech SolutionsTM
● Used for C03 cable chains long stroke protection
● Made of friction-optimized wear-resistant composite plastic
● Rugged and durable, extend the life of the cable carrier
● Supplied as a individual component
| Part No. | Product features | Used for cable carriers | Weight [g] |
| SP.C03.3242 | Reinforced wear-resistant material, easy to install, low cost | C03.32 / C03.42 | 3.5 |
| SP.C03.5680 | Reinforced wear-resistant material, easy to install, low cost | C03.56 / C03.80 | 7 |
● The separator separates inside space of the chain to protect cables, oil hoses, gas hoses, etc.
● Separator with high strength, can be firmly fitted in carriers
● The separator separates inside space of the chain to protect cables, oil hoses, gas hoses, etc.
● Separator with high strength, can be firmly fitted in carriers
▊DURAMOV® Cable Chain Finder[V1.1] is based on the analysis and calculation of a large number of test data in CSB® laboratory. You can calculations filler and installation data by entering parameters such as cables, gas tubes, oil tubes and installation data, The system will analyze your design data and finally output the adaptation cable chains.
▊Because the system calculate and analyze based on lab data, it can't exactly meet the ractual use requirements absolutly. The system data verification has certain limitations; CSB® recommends that the cable chains must be tested again to verify whether it meets the actual use requirements.
▊DURAMOV® Cable Chain Finder output data information is only for design reference, and can not be used as the final standard for determining the cable chains conformity, If you have any questions, please contact CSB® sales engineers.
High strength and stable, long service life, openable along the both sides
Inner height: 32 to 80mm
Inner width: 50 to 200mm
Openable along inner or outer radius from both sides, large pin/bore and crossbar with high locking force
Inner height: 18 to 45mm
Inner width: 38 to 175mm