CSB® Plastic bearings technology | News - CSB® Plastic Bearing Technology

15

2020-12

“Going The Distance” Research Activities of CSB Group to Help Children See The World

On August 18, under the leadership of the staff of Qingxi Group Baomai Company, the children came to Changsheng Sliding Bearing Co., Ltd., a listed company(Here after CSB Bearing) in Jiashan, Zhejiang, for offline learning and visits.

22

2020-03

New version of CSB website is online

Updated Version of CSB® Website is Newly Released and Put Online Since April 2020. The updates of website is not only to help customer speed up finding the products information precisely, but also release new products of ALB series High-speed ...

22

2020-03

CSB® New Products of Housing-Bore-Adjustable Flange Joint Bearing: GLBF-20

CSB® launched Housing-Bore-Adjustable Flange Joint Bearing: GLBF-20 in early 2020, which is for shaft diameter 20mm. The most creative feature is the outside part of this bearing is with housing-bore-adjustable design to balance the processing tolerance of housing bore. The diameter of housing bore is allowed to be 34.8-35.6mm, therefore reduce the product cost by lower machining precision.

17

2019-05

New Workshop Improves the Productivity of Linear Guide Rail Modules & Plastic Cable Drag Chains

CSB® invested a 50,000㎡ new workshop and put into use in May 2019. New workshop will further promote the production capacity and lead time for the Linear Guide Rail Modules and Plastic Cable Drag Chains. CSB® expanded the scale of the inspection center as well as put into use of Plastic Material Friction and Wear Test Machine, Plastic Bearing Life and Endurance Test Machine, Plastic Cable Drag Chain Durability Test Machine, etc…. It makes CSB® further provide customers a better product performance guarantee.

08

2018-06

Service Entry of CSB-PCC® Plastic Cable Drag Chain Durability Test Machine

The Plastic Cable Drag Chain Durability Test Machine for CSB-PCC® has put into use in the inspection center. This machine can provide the test for the Plastic Cable Drag Chain as follow: Micro Cable Drag Chain C01, Open-Designed Micro Cable ...

06

2017-11

CSB® listed on the Shenzhen Stock Exchange successfully

November 6th, 2017, a clarion Bell, Zhejiang Changsheng Sliding Bearings Co.,Ltd successfully listed itself on the Shenzhen Stock Exchange.

08

2016-12

CSB® 20th anniversary and new factory completed celebration

February 8th, 2016, it is the 20th anniversary and new factory completed celebration for Zhejiang Changsheng Sliding Bearings Co.,Ltd. CSB held a colorful sports meeting in the morning. Each department sent representatives to take part in different sports, such as tug-of-war, table tennis, and long-distance running and so on, which fully demonstrated the spirit of CSB people who are full of energy, brave, and positive.

26

2015-07

CSB's production capacity of Filament-Wound Bearings increased by 6 times

The CSB specialized R&D team has completed the transformation of the filament winding bearing production line. All the equipment of the production line has been renovated and combined perfectly with CSB's unique specialized technology by studying and improving every detail of quality and efficiency for the machines. Now the production capacity is 6 times more than previous time according to the latest production line capacity, shortening the lead time of filament-wound bearings. It is worth to mention that all transmission bearings of the equipments are made of CSB's own engineering plastic bearings which work in the harsh environment. That leads to less troubles of maintenance or repair for machines during production, whether the Plastic Linear Bearings move in dust or EPB8 Engineering Plastic Bearings work under water.

15

2015-05

CSB headquarters is about to move to a new address

The CSB's new headquarters building covers an area of 120,000㎡. The construction began in April 2013, was completed by the end of 2015. The new headquarters will further provide integrated office efficiency, and improve the production capacity rapidly by input of new production lines. The quality of bearings is still the prior element of the work of all CSB people. CSB will input a lot of process automatic detection machines and finished product performance testing equipments to ensure that each CSB product is qualified when assembled by customers. Modern production lines, clean and tidy staff dining room and recreational facilities will bring a new working experience to every CSB employee.

26

2015-04

CSB Established a R&D Team for Engineering Plastic Joint Bearings

CSB confirmed this project and formed a R&D team for engineering plastic joint bearings in May 2015. The project mainly includes the following products: all plastic joint bearings, plastic angular bearings, flange joint bearings, rod end joint bearings..., and extended development products from BAL plastic joint sphere. The project is expected to complete all development and performance testing work in June 2016, and carry out market promotion in July 2016.

26

2014-07

CSB Forms a R&D Team for LMS Linear Drive System

CSB determined and formed a R&D team for LMS linear drive system in June 2014. The research and development projects as follow: anodized aluminym long shaft, V-shaped linear guide rail and slider, stepmotor synchronous belt transmission 3D module, etc.... The products are planned to enter the market in July 2016.

20

2014-07

High Wear-resistant Filament-wound Bearing: CRW for Water Application was Developed Successfully

Filament-wound bearings are favored by users for the best performance of dry friction. The main reason is that filament-wound bearings have the bearing capacity of metal sliding bearings and meanwhile are more suitable for complete dry friction which ...

20

2014-06

CSB self-lubricating bearings reduce TCO

Currently, all mechanical design engineers are constantly looking for bearing lubrication solutions that can improve overall performance while reducing costs. The work core of CSB self-lubricating bearing material R&D engineers is the same. They...

19

2013-04

Commencement Ceremony of CSB New Plant at Xinda Road

The Commencement Ceremony of CSB Xinda Road Plant was held on April 16th, 2013. The CSB's new headquarters building covers an area of 120,000㎡. CSB plans to complete the relocation of headquarters by the end of 2015. The new headquarters...

19

2013-03

Closing of the National "Two Sessions", Xu Zhongming returns with honor

On the afternoon of March 18, Xu Zhongming, a representative of the 12th National People's Congress and a front-line worker, returned to Jiashan after finish the "two sessions". Mr. Xu was the first NPC deputy in the last 30 years since Chinese...

19

2013-03

Academician Xue Qunji came to CSB for guidance and inspection

Academician Xue Qunji of the Chinese Academy of Engineering came to CSB to guide and inspect; visited the CSB's production shop and had a cordial conversation with the workers.

03

2012-11

CSB was selected as a key high-tech enterprise in the National Torch Program

In November 2012, CSB Zhejiang Changsheng Sliding Bearing Co., Ltd. was selected as a key high-tech enterprise in the National Torch Program.

22

2012-07

EPB5Z Engineering Plastic Bearings Applied in Automobile Throttle

The vehicle determines the load of the engine and controls the pulse width of the fuel injection and the ignition timing according to the size of the throttle during idling and driving. Control flap controls the size of the intake air through the sensor to...

Navigation